Within the dashboard, this guide will walk you through the steps to set up an edge device running Chooch models for CPU, NVDIA GPU, and Jetson Orin. The guide will explain how to install the Chooch Inference Engine on your device. It will also outline how to use the AI Vision Studio to create a device, add camera streams, and add AI models to the device.
You must have a Chooch Enterprise Account to install the Inference Engine. If you do not have one, please contact [email protected] to request one.
8th to 13th generation Intel® Core™ > i7 (suggested i9)
3rd generation Intel® Xeon® Scalable processors
Memory
32GB RAM minimum
Disk
256GB SSD Drive
CPU (8.0.0)
Compatible Processors
8th to 13th generation Intel® Core™ > i7 (suggested i9)
3rd generation Intel® Xeon® Scalable processors
Compatible Operating Systems
Ubuntu* 18.04.3 LTS and above (64 bit)
Memory
Min 32GB RAM
Disk
256GB SSD Drive
Jetson Orin (8.0.0)
Compatible Processors
Jetson AGX Orin 64GB
Jetson AGX Orin 32 GB
Compatible Operating Systems
Jetpack 5.1.2
Memory
Min 32GB RAM
Installation guide
Many of the following command lines will require your system’s root or super user password. An Internet connection is needed to perform many of the following steps.
GPU (8.0.0) setup guide
Installation requirements for Ubuntu server for GPU
If Ubuntu has not been installed, please use the following link: https://releases.ubuntu.com/20.04/. If Ubuntu has been previously installed, please continue below.
Enter the following script to your terminal and follow the instructions.
This installation time may take approximately 60 minutes or more, based on your network upload speed.
#default GPU install (see below for other optional arguments)#NOTE: API key MUST go after -k argument. Other optional argument appends to the end.bash -c "$(curl http://get.chooch.ai/inference-engine-v8)" -s -k api_key#NOTE: This command installs the necessary driver version and Nvidia Docker, deletes the oldest inference engine, and installs a new Chooch Inference Engine.
Optional arguments
api_key
API Key provided by Chooch can be found at the bottom of your Chooch AI Vision Studio Homepage.
CPU (8.0.0) setup guide
Installation requirements for Ubuntu Server for CPU
Enter the following script to your terminal and follow the instructions:
This installation time may take approximately 60 minutes or more, based on your network upload speed.
#default CPU install (see below for other optional arguments)
#NOTE: api key MUST go after -k argument. Other optional argument append to the end
bash -c "$(curl http://get.chooch.ai/inference-engine-v8-cpu)" -s -k api_key
Optional arguments
-d <install_dir>
install directory (defaults to $HOME if not specified)
api_key
API Key provided by Chooch can be found at the bottom of your dashboard’s Homepage.
Jetson Orin (8.0.0) setup guide
Chooch supports the NVIDIA JetPack SDK. JetPack installation is managed by NVIDIA SDK Manager. You will need to create a free NVIDIA account or use an existing one.
Please follow the NVIDIA SDK Manager installation instructions that explain how to install Jetpack OS 5.1.2, using a host device (host device requirements below).
Required Host Operating System
Ubuntu ≥ 20.04
Compatible Jetpack Version
Jetpack 5.1.2
Required Host Hardware
RAM 8GB
Internet Connection
All CUDA libraries will be included in Jetpack. If you are seeing errors about missing CUDA drivers, please reboot to confirm proper installation and setup.
Jetson Orin installation instructions
If you are accessing the Jetson Orin device locally, login into http://localhost:3000 and follow the instructions below. If accessing Jetson Orin remotely, login from the Jetson’s public IP address at port 3000 to access the Chooch Inference Engine.
On Host Device:
Connect the hardware directly to the host device with SDK Manager installed. (This will vary from device to device, but normally a USB cord is provided)
Launch NVIDIA SDK Manager, make the following selections:
Select the connected device
Select JetPack 5.1.2
Follow the on-screen prompts until the device begins to install the required configurations.
Once the JetPack 5.1.2 is installed, navigate to the Jetson-Orin Edge Hardware:
Open CLI Terminal.
Run the following command.
# Replace API_KEY with your API Key generated from app.chooch.ai dashboard.bash -c "$(curl http://get.chooch.ai/inference-engine-v8-jetson)" -k API_KEY
You can access your Chooch Inference Engine interface on your device from http://localhost:3000/.
Copy and paste the Device ID of the device you want to connect. The Device list can be found under the Devices tab of your dashboard.
Set a password to access the dashboard.
You can access your Chooch Inference Engine interface on the device after installation, from http://localhost:3000/.
Once you have finalized changes to your stream from https://app.chooch.ai dashboard, click on Cloud Sync from the Inference Engine dashboard to sync the changes.
Note: If Cloud Sync doesn’t appear to finish, try refreshing the page.
Verify camera feed is showing and sending prediction data by clicking on Streams tab.
Now you can start using the system!
Some useful commands start, stop and restart the service on device.
New Gartner Report! Discover how AI-powered vision systems can provide real-time monitoring, hazard detection, and predictive analytics to create safer work environments. Access your free copy →